FREE GROUND SHIPPING ON ORDERS OVER $500! (Continental USA only)×
Your Language : English

Telephone: (866) 4 NOZZLE

0 item(s)
×

Registration

Profile Informations

Login Datas

or login

First name is required!
Last name is required!
First name is not valid!
Last name is not valid!
This is not an email address!
Email address is required!
This email is already registered!
Password is required!
Enter a valid password!
Please enter 6 or more characters!
Please enter 16 or less characters!
Passwords are not same!
Terms and Conditions are required!
Email or Password is wrong!

Root Cutting Nozzles

Root cutting nozzles are specifically designed to cut through partial to full pipe obstructions.  These awesome jetter nozzles employ a spinning base nozzle together with a cutting head or chains.  Nozzles can use different types of cutting heads, bought separately or as a kit.

2 Item(s)

Grid  List 

  1. Reaper Jetter Nozzle

    1/2" Reaper Jetting Nozzle

    1 forward jet at 0° and 4 rear jets at 20°. The Reaper has the best cutting power that we've seen for a water cutting nozzle. The single, rotating forward jet creates a 30° cutting cone that has outstanding cutting power, taking half the time that other popular front jet nozzles took in our test on an OSB board. DON'T TAKE OUR WORD FOR IT, here's a video from Hydra-Flex showing the Reaper vs. leading competitors: Reaper Nozzle video 4 static rear jets at 20° give the nozzle good pulling power down the pipe and good flushing power as you bring debris back. The Reaper is made from stainless steel with tungsten carbide added to wear surfaces for long life. Configurable from 7.3 - 18 GPM, up to 4,000 PSI. see the specifications below. GPM / PSI configurations are provided in the drop down menus. These are the recommended configurations provided by the manufacturer.
    Learn More
    Starting at:
    $1,092.00
    New
  2. Root Rat Flail Chain Heads

    Root Rat Nozzles Kit

    Available in 1/4", 3/8", 1/2" & 1" jetter nozzle sizes. The Root Rat nozzles are very versatile and can be configured to operate with jetter pumps operating between a range of 6 - 12 GPM and 2,000-7,500 PSI. The nozzles are hardened stainless steel for long life. Kits come with 2 chain heads and extra chain. 1/4" and 3/8" Root Rat kits are one of the few effective chain-head solutions you'll find for pressure washers and jetters with smaller GPM pump ratings. The Root Rat is able to be configured for GPM ratings as low as 6 GPM! Most chain-head nozzles start at a minimum of 12-14 GPM. The kit comes with 1 chain head and a wire head, 1/2" and 1" kits have an additional choice of cutting chain types: either a roller type chain (bicycle chain) or flail chain (large steel links). A centralizer kit is optionally available for the nozzle, standing it up in the middle of the pipe to allow the spinning head to quickly reach and better sustain cutting power, a great add-on for lower GPM configurations. The 1/2" and 1" models also have 2 heads: a cutting head with flail chain and a wire head for less aggressive cleaning. Click for video of Root Rat flail chain cutting a concrete block
    Learn More
    Starting at:
    $895.00
    New Sale

2 Item(s)

Grid  List 

My Cart

You have no items in your shopping cart.